Perchloric Acid Scrubber Fume Hood

● Model: UFU_PPAFH

● Dimension: W4’/W5’/W6’ and accept customized dimension

● Style: 100% Polypropylene Fume Hood construction

● Extra Large Work Surface

● Base Storage Cabinets made in Polypropylene materials

● Worktop: PP material.

● Powder supply: AC220V±10%,50 / 60Hz

● Air Velocity: 0.3~0.5±0.1m/s

● Noise:≤65dB(A)

● With flushing system inside

● Accessory: Circuit breaker, Electric sockets, Water supply&Gas supply

1. Water inlet valve of pump When the water inlet valve of pump is in use, it is normally open and not allowed to close (except for the need to close when replacing the pump).

2. Water inlet valve of the water tank When the water inlet valve of the water tank is in use, the valve is normally open and not allowed to close (except for the need to close when replacing the float ball).

3. Blow-down valve When the blow down valve is in use, it is normally closed and not allowed to be opened (except for the need to replace the absorbed liquid in the water tank and open when blow down).

4. Small sink valve on the table Under the use of small sink valve on the table, the valve is normally closed and not allowed to be opened (except when cleaning the hanging cabinet of fume hood separately).

5. Spraying valve of the upper cabinet When the spraying valve of the upper cabinet is in use, it is usually open and not allowed to be closed (except when the water tank drains).

Hot Tags: perchloric acid scrubber fume hood, China, manufacturers, suppliers, factory, for sale, made in China, perchloric acid fume hood, Chemical Resistant Polypropylene Fume Hood, acid resistant fume hood, Perchloric Acid Scrubber Fume Hood, PP Fume Hood, Wet scrubber fume hood